preliminary preliminary g g a a n n p p o o w w e e r r a a m m p p p p a a l l l l e e t t r r t t p p 0 0 7 7 0 0 5 5 0 0 - - 2 2 0 0 b b ? tel : 82-31-250-5078 ? all specifications may change without notice. ? rfsales@rfhic.com ? version 1.0 product features application ? broadband amplifier design ? small and light weight ? 50 ohm input / output impedance matched ? highly reliable and rugged design ? high efficiency, high gain ? lte application description the RTP07050-20B is designed for rf sy stem application frequencies from 728 mhz to 842.5mhz, with high gain. this pallet amplifier uses gan on sic hemt technology which perform s high breakdown voltage, high linearity, and high efficiency. the RTP07050-20B is a lte dpd application amplifier. electrical specifications @ vdd= 45v, 50 ? system parameter symbol specification frequency range bw 728~842.5mhz operating bandwidth within bw obw 114.5mhz average output power pout 47.2dbm(52.5w) avg. @ lte 1fa 10mhz peak output power psat 54 dbm (min. duty cycle 10% pulse) aclr (lte 1fa 10mhz) @ po=47.2dbm aclr pre-dpd -27dbc(min) @10mhz @-30 ~ +60 c @45v @cfr 6.5db post-dpd -50dbc(min) @10mhz rf gain @ 25 g 55db (min.) gain flatness g 3.0 db(peak to peak) @ operating frequency input return loss s11 -12db (max.) output return loss s22 -12db (max.) normal operating voltage vdc v1= +5.6v, v2= +45v current consumption @ po=47.2dbm idd 0.3a @ 5.6v (max.) 3.1a / 45v (typ.) efficiency eff 38% @ 45v (typ.) feedback output level @ 47.2dbm fb +8dbm 2db temp detector t 0.9v @ 40
preliminary preliminary g g a a n n p p o o w w e e r r a a m m p p p p a a l l l l e e t t r r t t p p 0 0 7 7 0 0 5 5 0 0 - - 2 2 0 0 b b ? tel : 82-31-250-5078 ? all specifications may change without notice. ? rfsales@rfhic.com ? version 1.0 environmental characteristics parameter symbol min. typ. max. unit operating ambient temperature ta -30 +65 c storage temperature tstg -40 +130 c relative humidity w/o condensation rh 80 % maximum rating input overdrive p od -2dbm max. load vswr : 1 (all phase & amplitude) nom. operating case temperature tc +100 c interface connector 8-pin-control ( molex_5267_08 ) pin # description specifications 1 vcc +5.6v 2, 3, 4 vcc +45v 5, 6, 7, 8 gnd ground 4pin-control ( smw200-04p, yeonho ) pin # description specifications 1 enable / disable amp enable (+5.6v) / amp disable(+0v) 2, 3 gnd ground 4 temp det temp sensor (0.9v @ 40 ) mechanical specifications parameter value units limits dimensions 170 x 100 x 18.8 mm weight 0.60(max) kg rf input connector sma(female) rf output coupling connector sma(female) rf output connector sma(female) i/o connector smw200 4pin(male) molex 8pin(male) cooling external heat-sink
preliminary preliminary g g a a n n p p o o w w e e r r a a m m p p p p a a l l l l e e t t r r t t p p 0 0 7 7 0 0 5 5 0 0 - - 2 2 0 0 b b ? tel : 82-31-250-5078 ? all specifications may change without notice. ? rfsales@rfhic.com ? version 1.0 *note: connector positions and module mount holes may be subjected change. outline drawing unit : mm
preliminary preliminary g g a a n n p p o o w w e e r r a a m m p p p p a a l l l l e e t t r r t t p p 0 0 7 7 0 0 5 5 0 0 - - 2 2 0 0 b b ? tel : 82-31-250-5078 ? all specifications may change without notice. ? rfsales@rfhic.com ? version 1.0 RTP07050-20B budget test data (test results: dpd operation) test equipments - dpd engine(optichron board(op6180) - signal generator : e4438c (agilent) - spectrum analyzer : e4440a (agilent) - network analyzer : 8753es (agilent) - power supply : 6674a (agilent) - RTP07050-20B test condition - signal : lte 1fa 10mhz(papr 6.5db) - cfr apply - amp temperature: 40 c
preliminary preliminary g g a a n n p p o o w w e e r r a a m m p p p p a a l l l l e e t t r r t t p p 0 0 7 7 0 0 5 5 0 0 - - 2 2 0 0 b b ? tel : 82-31-250-5078 ? all specifications may change without notice. ? rfsales@rfhic.com ? version 1.0 gain & gain flatness s11 s22
preliminary preliminary g g a a n n p p o o w w e e r r a a m m p p p p a a l l l l e e t t r r t t p p 0 0 7 7 0 0 5 5 0 0 - - 2 2 0 0 b b ? tel : 82-31-250-5078 ? all specifications may change without notice. ? rfsales@rfhic.com ? version 1.0 pre ? dpd @ 733mhz, lte 1fa 10mhz post- dpd @ 733mhz, lte 1fa 10mhz pre ? dpd @ 785mhz, lte 1fa 10mhz post- dpd @785mhz, lte 1fa 10mhz pre ? dpd @837.5mhz, lte 1fa 10mhz post- dpd @837.5mhz, lte 1fa 10mhz
preliminary preliminary g g a a n n p p o o w w e e r r a a m m p p p p a a l l l l e e t t r r t t p p 0 0 7 7 0 0 5 5 0 0 - - 2 2 0 0 b b ? tel : 82-31-250-5078 ? all specifications may change without notice. ? rfsales@rfhic.com ? version 1.0 psat=54.8dbm@733mhz psat=54.59dbm@785mhz psat=54.41dbm@837.5mhz
p p r r e e l l i i m m i i n n a a r r y y g g a a n n p p o o w w e e r r a a m m p p p p a a l l l l e e t t r r t t p p 0 0 7 7 0 0 5 5 0 0 - - 2 2 0 0 b b ? tel : 82-31-250-5078 ? all specifications may change without notice. ? rfsales@rfhic.com ? version 1.0 test sheet(s/n:rtp07-12020001) parameter spec 0001 frequency 728 ~842.5mhz 733mhz 785mhz 837.5mhz input power -11.0 -10.2 -10.1 output power(avg.) 47.2dbm(52.5w)@10mhz 47.2 output power(peak.) 54dbm(min.) duty 10% by pulse 54.8 54.59 54.40 aclr(lower/upper) -27dbc @ 10mhz offset -30.5 -29.1 -28.1 -28.9 -28.6 -27.5 aclr(lower/upper)_dpd -50dbc @ 10mhz offset -55.1 -56.3 -55.1 -51.1 -56.5 -55.7 coupling port output 8dbm2.0db 7.2 temp detector(mv) 0.9v @ 40 0.95 current consumption vcc(+45v) : 3.1a(max.) 3.01 3.05 2.85 2.80 pae(%) >38% 38.0 41.0 41.6 frequency(n/a) 837.5mhz ~957mhz 733mhz 785mhz 837.5mhz gain flatness 3.0db(peak to peak) 58.2 57.4 57.3 0.9 input return loss -12db(max.) -15.4 -34.8 -15.7 output return loss -12db(max.) -21.0 -17.3 -14.4 rfhic corporation (rfhic) reserves the right to make changes to any products herein or to discontinue any product at any time w ithout notice. rfhic do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, inclu ding without limitation consequential or incidental damages. the product specifications herein expressed have been carefully checked and are assumed to be reliable. how ever, rfhic disclaims liability for inaccuracies and strongly recommends buyrs to verify that the in formation they are using is curre nt before placing purchase ord ers. rfhic products are not intended for use in life support equipment or application where ma lfunction of the product can be expected to result in persona l injury or death. buyer uses or sells such products for any such unintended or unauthorized applicatio n, buyer shall indemnify, protect and hold rfhic and its direct ors, officers, stockholders, employees, representatives and distributors harmless against any a nd all claims arising out of such use. rfhic?s liability unde r or arising out of damages, claims of whatsoever kind and nature which rfhic p roducts could cause shall be limited in amount to the net p urchase p rice of the p roducts sold to bu y er b y rfhic .
|
